I have an AP9619 Network Management Card connected to our APC Smart-UPS 5000VA 208V and I need to set the IP address of the Network Card using a local computer. The Installation and Quick-Start manual (https://www.apc.com/salestools/ASTE-6Z5QDZ/ASTE-6Z5QDZ_R0_EN.pdf) says to connect to the serial port on the face of the card, but the AP9619 does not have a serial port on its face. How do I get access to the Network Management Card itself?
You connect the serial cable to the serial port on the UPS. You will communicate with the NMC through that connection.
Choose a location